Hougen, invented the Magnetic Drill many years ago and continues to improve upon their designs. The original swivel base unit, HMD904S ($929), has become a very popular addition to their lineup. Now Hougen has just launched the HMD925S ($1438) and HMD914S ($1345) swivel base models. These units are basically the same motors as their stationary base counterparts however the swivel base allows for 1-1/8”W x 1-3/8”L travel. The swivel base saves a great deal of time lining up the hole as well as improves accuracy with one stroke lock & unlock handle.
For more information on Hougen Mag Drills or Rotabroach metal cutting bits, contact the professionals at Ohio Power Tool 800-242-4424 or email [email protected].
Tips for Using a Portable Magnetic Drill Press:
- #1 cause of broken or prematurely dull cutters is too slow of feed rate. Slower feed rates will not add life to your cutter but actually reduce the cutter’s life. Use firm steady feed pressure throughout cut.
- Always make sure to clear all chips from your cutter before starting the next hole.
- Make sure support system for drill arbor is in place and not worn out. If using on a drill press, a support system must be used.
- Make sure mag drill is on a clean work piece and securely attached. Uneven or large build up of debris can cause drill slippage. Material must be at least 3/8" thick. Painted material can also be troublesome if paint buildup does not allow magnet to hold securely.
- When slug ejection becomes unreliable or tool resists cutting, resharpen or replace your cutter.
- Always use coolant when drilling. For best results use Hougen’s Slick-StikTM or RotaMagicTM cutting lubrication.
